Automatic Bomb Calorimeter LABC-A10
- Calorimeter type: Isoperibol
- Temperature range: 5 to 40°C
- Measurement range: 5 to 40 MJ/ kg
- Operation Mode: The outer barrel temperature is constant
Automatic Bomb Calorimeter LABC-A11
- Calorimeter type: Isoperibol
- Temperature range: 5 to 40°C
- Measurement range: 5 to 40 MJ/ kg
- Operation Mode: A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode
Octane Number and Cetane Number Tester LOCT-A10
- Measuring Range For Aviation Gasoline: 86.0 to 105.0/MON
- Measuring Range For Gasoline For Motor Vehicles: National standard: 65.0 to 110.0/RON<br/> National-V standard: 70 to 115.0/RON<br/> Blended gasoline: 75.0 to 120.0/RON<br/> Light gasoline: 50.0 to 85.0 /MON<br/> Isomerized gasoline: 85.0 to 120.0/RON<br/> Arene gasoline: 90.0 to 120.0/RON
- Measuring Range For Ethanol: E93: 92.0 to 95.0/RON<br/> E97: 95.0 to 99.0/RON<br/> Judgement: 60.0 to 120.0/RON
- Measuring Range For Automobile Diesel Fuels: Cetane number: 25 to 75/CN<br/> Cetane index: 20 to 80/CI
Acid Number and Acidity Tester LAAT-A11
- Ambient temperature: ≤ 35 °C
- Relative humidity: ≤ 85 %
- Precision of titration tube: Scale division is 0.02 ml
- Total power consumption: ≤ 1200 W
Acid Number Tester LAAT-A12
- Measurement range: ≥0.05 mg KOH/g
- Potential measurement range: 0 to 1800.0 mV
- Burette volume: 10 mL
- Minimum titration volume: 0.001 ml
Base Number Tester LAAT-A13
- Volumetric analysis: Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.02 ml
- Automatic acid titration: Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.1 pH
- Automatic potential control: Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ 10 mV
- Ambient temperature: 0 ~ 35 ℃
Automatic PMCC Flash Point Tester LCFP-A11
- Ambient temperature: 10 °C ~ 40 °C
- Relative humidity: ≤ 80 %
- Measurement Range: Ambient Temperature ~ 250 °C
- Flash Point: Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C
Automatic Distillation Apparatus LADA-A10
- Heating power: 2 kW
- Cooling power: 0.5 kW
- Steam temperature: 0 to 400℃
- Oven temperature: 0 to 500℃
Benzene Distillation Tester (Low Temperature) LDT-A11
- Ambient temperature: -10°C to 35°C
- Relative humidity: ≤ 85 %
- Thermometer: Each one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C
- Scale division: 0.1 ℃
Distillation Tester (low temperature Double units) LDT-A16
- Graduated flasks: 100 ml
- Distillation flask: 125 ml
- Ambient temperature: ≤ 35 °C
- Relative humidity: ≤ 85 %
Distillation Tester (low temperature single unit) LDT-A17
- Graduated flasks: 100 ml
- Distillation flask: 125 mL
- Ambient temperature: ≤ 30 °C
- Relative humidity: ≤ 85 %
Distillation Tester Dual Units LDT-A15
- Graduated flasks: 100 ml
- Scale division of graduated flask: 1ml
- Distillation flask: 125 ml
- Ambient temperature: ≤ 35 °C
Distillation Tester Front Type LDT-A14
- Distillation flask: 125 mL
- Ambient temperature: Room temperature to 35 °C
- Relative humidity: ≤ 85 %
- Thermometer: (-2 )°C to 300 ℃ and (-2) °C to 400 ℃
Distillation Tester LDT-A10
- Graduated flasks: 10 ml and 100 ml
- Scale division of graduated flask: 10 ml is 0.1 ml and 100 ml is 1 ml
- Ambient temperature: (-10) °C ~ 35 °C
- Relative humidity: ≤ 85 %
Kinematics Viscometer LKV-A10
- Ambient temperature: 15 to 35°C
- Relative humidity: ≤ 85%
- Capillary viscometer: 6 capillary Pinkevitch viscometer tubes
- Stirring motor: 1200 rpm
Kinematics Viscometer LKV-A11
- Ambient temperature: (-10) °C ~ 35 °C
- Relative humidity: ≤ 85 %
- Capillary viscometer: 11 pieces
- Stirring motor: 6 W, 1200 rpm
Kinematics Viscometer LKV-A12
- Ambient temperature: (-10) °C ~ 35 °C
- Relative humidity: ≤ 85 %
- Capillary viscometer: 11 pieces
- Stirring motor: 6 W, 1200 rpm
Kinematics Viscometer LKV-A13
- Ambient temperature: (-10) °C ~ 35 °C
- Relative humidity: ≤ 85 %
- Capillary viscometer: 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group
- Stirring motor: 6 W, 1200 rpm
Kinematics Viscometer LKV-A15
- Ambient temperature: (-10) °C ~ 35 °C
- Relative humidity: ≤ 85 %
- Capillary viscometer: 11 pieces
- Stirring motor: 6 W, 1200 rpm
Automatic Pour Point Tester LLTT-A23
- Ambient temperature: ≤ 30 ℃
- Refrigeration speed: > 40 °C / 10 min
- Repeatability for solidifying point: ≤ 2 °C
- Repeatability for pour point: ≤ 3 °C
Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12
- Ambient temperature: (-10)℃ ~ 35 ℃
- Relative humidity: ≤ 85 %
- Sample cup Inner diameter: 31.0 ~ 32.0 mm
- Sample cup Wall thickness: 1.0 ~ 1.5 mm
Freezing Point Tester LLTT-A11
- Freezing point range: -54°C to 2°C
- Cold bath measurement temperature range: -70° to 20°C
- Temperature controlling accuracy: ±0.5°C
- Bath liquids stirring: Electric
Multifunctional Low Temperature Tester LLTT-A16
- Refrigeration system: New-type refrigeration compressor
- Controlling temperature of cold trough: Cold trough I: 0 °C, ± 0.5 °C; Cold trough II: 0 °C, (-17) °C, ± 0.5 °C; Cold trough III: (-17) °C, (-34) °C, ± 0.5 °C; Cold trough IV: (-70) °C, ± 0.5 °C
- Ambient temperature: ≤ 30 ℃
- Relative humidity: ≤ 85 %
Pour and Cloud Point Tester LLTT-A14
- Chamber quantity: 2 chambers
- Chamber 01 temperature control: Ambient to -51 ℃
- Chamber 02 temperature control: Ambient to -65 ℃
- Temperature precision: ±1°C
Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15
- Refrigeration system: New-type refrigeration compressor
- Controlling temperature of cold trough: Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C
- Ambient temperature: ≤ 30 ℃
- Relative humidity: ≤ 85 %
Solidifying Point Constant Temperature Water Bath LLTT-A10
- Capacity: 20 L
- Temperature range: Ambient +5°C to 100°C
- Precision: ± 0.1℃
- Stirring range: 1200 r/min
Solidifying Point Tester ('-20°C +80°C') LLTT-A22
- Temperature controlling accuracy: ± 0.5 °C
- Refrigeration system: New-type refrigeration compressor
- Cold trough: One trough with two baths, temperatures in two baths are equal
- Controlling temperature of cold trough: Room temperature ~ (-70) °C
Solidifying Point Tester (Solidifying Point and Cold Filter Plugging Point) LLTT-A21
- Refrigeration system: New-type refrigeration compressor
- Cold trough: One trough with two baths, temperatures in two baths are equal
- Controlling temperature of cold trough: Room temperature ~ (-70) °C
- Ambient temperature: ≤ 30 ℃
Automatic Cleveland Open Cup Flash Point Tester LOFP-A12
- Ambient Temperature: 10 ℃ ~ 40 °C
- Relative Humidity: ≤ 80 %
- Temperature Measurement- Full Scale: Ambient temperature to 300 °C
- Temperature Measurement- Repeatability: ≤ 8 °C
Automatic COC Flash & Fire Point Tester LOFP-B10
- Ambient Temperature: 10 ℃ ~ 40 ℃
- Relative Humidity: ≤ 85 %
- Temperature Measurement- Full Scale: Ambient temperature to ~ 400 ℃
- Temperature Measurement- Repeatability: ≤ 4 ℃
Color Tester LCT-A20
- Light source: 220 V, 100 W
- Temperature of grinding milk white light bulb: 2750 ± 50 K
- Light hole( Φ14): 26 pieces
- Color comparing tube: Φ32 mm
Insulating Oil Breakdown Voltage Tester LIBT-A23
- Power supply: AC 220 V ± 5 % , 50Hz
- Measurement range: 0 ~ 75 kV
- Voltage rising rate: 3 kV ± 10 % / s
- Distance between electrodes: 2.5 mm
Automatic Lubricating Oils Oxidation Stability Tester LOST-D10
- Samples: 2
- Oil bath cubage: 30 L
- Angle between bomb and water surface: 30 °
- Speed of rotary assembly: 100 ± 5 RPM
Distillate Fuel Oil Oxidation Stability Tester LOST-D12
- Samples: 8
- Temperature: 100 ℃
- Temperature controlling accuracy: 0.1 ℃
- Flow meter: 3 ± 0.3 L / H oxygen
Gasoline Oxidation Stability Tester LOST-D13
- Type: Compact; Desktop
- Design: Integrated
- Bath: Metal bath (without water usage)
- Temperature control point of metal bath: 100℃ ± 1℃
Oxygen Bomb Calorimeter LBC-C20
- Heat capacity: 14000 ~ 15000 J / K
- Temperature measurement range: 10 ~ 35 ℃
- Repeatability error: ≤ 0.2 % (Grade C)
- Endured pressure in oxygen bomb: 20 MPa
Carbon Residue Tester (CONRADSON METHODS) LRCT-B10
- Porcelain crucible: 30 ml
- Inner iron crucible: 75 ml
- Outer iron crucible: 190 ml
- Burner: Mig Burner
Copper Strip Corrosion Tester LRCT-A13
- Sample hole: 4 pieces
- Sample quantity: 4 to 12 pieces
- Ambient temperature: Room temperature to 35 °C
- Temperature controlling range: Room temperature to 100°C
Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10
- Sample hole: 2 pieces
- Speed of stirring motor: 1400 rpm
- Ambient temperature: 10 to 35°C
- Temperature controlling range: Room Temperature to 100°C
Coulometric Karl Fischer Titrator LWT-A30
- Ambient Temperature: 10°C to 35°C
- Measurement Range: 0 to 100 mg
- Resolution: 0.1 µg
- Max. Electrolysis Speed: 40 µg /s
Coulometric Karl Fischer Titrator LWT-A31
- Maximum current: 400 mA
- Measurement range: 3 µg to 9999.9 µg
- Resolution: 0.1 µg
- Precision 1: ± 2 µg (3µg H<sub>2</sub>O to 20µg H<sub>2</sub>O)
Crude Petroleum Water Content Tester LWT-B10
- Ambient Temperature Range: -10 to 35°C
- Relative Humidity: ≤85%
- Distillation Flask: 1000 ml
- Receiver: 5 ml, with 0.05 ml graduation
