Automatic horizontal tensile tester TP-B11
- Sample (size) length: 90 to 200 mm
- Sample width: 15 mm, 25 mm, 50mm
- Measuring range: 0 to 30, 0 to 100 N,0 to 300 N
- Accuracy: ± 1 %
Automatic horizontal tensile tester TP-B12
- Sample (size) length: 180 mm (180, 150, 100, 90, 50 mm adjustable)
- Sample width: 15 mm
- Measuring range: 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N
- Accuracy: ± 1 %
Bekk Smoothness tester TP-L20
- Measuring scope: ( 1 to 9999) s, divided in to (1 to 15) s, (15 to 300) s, (300 to 9999) s, the automatic (no. more than 200 s)
- Accuracy: ±0.1 s within 300 s
- Vacuum system volume (ml): Bigger volume: 380 ± 1<br/> Smaller volume: 38 ± 1
- Contact pressure: 100 ± 2 kPa
Carton compression tester TP-I10
- Measuring range: 0.1 to 10 kN
- Indication error: < ± 1%
- Platen Size: 500×500 mm (customized)
- Operating stroke: 500 mm (customized)
Carton compression tester TP-I11
- Measuring range: 1 to 50 kN
- Indication error: < ± 1%
- Platen Size: 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized)
- Operating stroke: 800 mm/ 1000 mm/ 1200 mm/ 1500 mm (customized)
COBB sample cutter TP-C30
- Sample diameter: 125 mm
- Sample error: ± 0.2 mm
- Sample Thickness: 0.1 to 1.0 mm
- Dimension: 240×288×435 mm
Coefficient of friction tester TP-D10
- Measurement range: 0.01 to 10 N
- Slider weight: 200 g
- Slider size: 63×63 mm
- Testing accuracy: ± 2 %
Crush tester TP-L10
- Measurement range: 5 to 500 N, 50 to 3000 N
- Resolution: 1 N
- Accuracy: ± 1 %
- Variability: ≤ 1 %
Electronic bending stiffness tester TP-E10
- Testing speed: 200° ± 20° / min
- Test range: 1 to 10000 mN
- Indicating Error: ± 1 %
- Testing length: 5, 10, 15, 20, 25, 50 mm
Electronic Tearing tester TP-J21
- Capacity: 10 -16000 mN
- Resolution: 0.1 mN
- Tearing arm: 104 ± 1 mm
- Tearing angle: 27.5° ± 5°
Folding endurance tester TP-M10
- Measuring scope: 0 to 99999 s
- Folding angle: 135° ± 2°
- Tensile scope: 4.9 to 14.7 N
- Folding head suture size: 0.25 mm, 0.50 mm, 0.75 mm, 1.00 mm
Ink rubber tester TP-F10
- Sample size (L*B): 230×50 mm (can join short samples together)
- Rub pressure: 20 ± 0.2 N
- Friction speed: 43 times / min
- Friction area (L*B): 155×50 mm
Internal Ply bond Tester TP-J11
- Capacity: A: 20 to 500 J/m2 B: 500 to 1000 J/m2
- Impact angle: 90°
- Unit: Lb-ft/in2 J/m2
- Error: A: ± 1 J/m2 B: ± 2 J/m2
Mullen burst tester TP-K10
- Measurement range: 0 to 5600 kPa
- Accuracy: ± 0.5 % F.S.
- Compression speed: 170 ± 15 ml/min
- Clamp pressure: ≥ 690 kPa
Mullen burst tester TP-K11
- Measurement range: 0 to 1600 kPa
- Accuracy: ± 0.5 % F.S.
- Compression speed: 95 ± 5 ml/min
- Clamp pressure: ≥ 430 kPa
Paper air permeability tester TP-J10
- Measuring range: 0 to 1000 ml/min
- Test area: 10 ± 0.02 cm2
- Area differential pressure: 1 ± 0.01 kPa
- Inner diameter of grip ring: 35.68 ± 0.05 mm
Paper and cardboard thickness meter TP-E20
- Measuring range: 0 to 4 mm
- Accuracy: 0.01 or 0.001 mm
- Gauge: Analogue gauge display
- Contact pressure (to create false weight): 100 ± 10 kPa
Paper and cardboard thickness meter TP-E21
- Measuring range: 0 to 20 mm
- Accuracy: 0.01 mm
- Gauge: Analogue gauge display
- Contact pressure (to create false weight): 20 ± 0.5 kPa
Paper tearing tester TP-J20
- Measuring range: 0 to 1000 mN
- Resolution: 0.1 mN
- Indication error: ± 1 %
- Tearing arm: 104 ± 1 mm
Pulp beating (refining) freeness tester TP-C10
- Measurement range: 0 to 100° SR
- Sealed testing speed: 100 ± 10 mm/s
- Volume of distilled water: 1000 ± 5 ml
- Draining time: 149 ± 1 s
Puncture strength tester TP-J12
- Measuring range: A (1 to 6) J indicating error ± 0.05 J<br/> B (1 to 12) J indicating error ± 0.05 J<br/> C (1 to 24) J indicating error ± 0.05 J<br/> D (1 to 48) J indicating error ± 0.05 J<br/> The indicating errors w.r.t measurement range of 20 to 80 %
- Frictional resistance: <0.25 J
- Pyramid dimension: Three sides: 60×60×60 mm, height 25 ± 0.7 mm, Arris edge fillet radius 1.5 ± 0.1 mm
- Dimension: 800×470×840 mm
Softness tester TP-H10
- Measuring range: 10 to 1000 mN
- Division value: 1 mN
- Accuracy: ± 1%
- Indicating Error: ≤ 0.5
Standard strip cutter TP-G10
- Sample width: 15 mm
- Sample maximum length: 300 mm
- Parallelism: ≤ 0.1 mm
- Dimension: 240×520×70 mm
Tensile Stiffness Tester TP-B10
- Sample (size) length: 38×70 mm
- Measuring range: (1-500) mN.m (divided into 7 small ranges)
- Indication error: 0.02
- Test speed: (200° ± 20°)/ min
Vertical tensile tester TP-B20
- Sample (size) length: 0 to 200 mm adjustable
- Sample width: 15 mm
- Measuring range: 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N
- Accuracy: ± 1 %
Water absorption tester TP-C20
- Measurement range: 0 to 200 mm
- Specimen size: 15×250 mm
- Division value: 1 mm
- Number of specimen holders: 5
Water absorption tester- Cobb Tester TP-C21
- Metal Cylinder inner area: (100 ± 0.2) cm2
- Metal Cylinder height: 50 mm
- Metal roller width: (200 ± 0..5) mm
- Metal roller weight: (10 ± 0.5) kg
Whiteness and chromaticity tester TP-A10
- Sample (size) length: Diameter ≥30 mm, Thickness ≤ 40 mm
- Measurement mode: Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b
- Stability: ≤ 0.1 within 30 min
- Accuracy: Chromaticity co-ordinate 0.0001
Aging Oven TAO-A10
- The maximum temperature: 300°C
- Temperature fluctuation: Within ± 0.5°C
- Temperature uniformity: Within ± 1°C
- Rotate speed of the turntable: 11 r/min to 12r/min, turntable dimension diameter: 285 mm
Charpy/ Izod Impact Tester TCI-A10
- Impact Speed & Energy (charpy): 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
- Impact energy (Izod): 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
- Resolution of impact energy: 0.001 J
- Pendulum up angle: 160°
Falling Weight Impact Tester TFWT-A10
- Temperature range: 10 to 35°C
- Maximum falling height: 2000 mm
- Resolution of displacement: 1 mm
- Height error: < ± 2 mm
Heat sealer THS-A10
- Seal temperature: Room temperature -250°C
- Control accuracy: ± 0.2°C
- Dwell time: 0.1 S to 999.9 S
- Dwell pressure: 0.05 to 0.7 MPa
Lasting adhesive tester TLAT-A10
- Standard roller: 2000 ± 50 g
- Testing stations: 3
- Dimension (L*W*H) tester: 320×210×550 mm (3 stations)
- Weight for stations: 10 kg (3 stations)
Lasting adhesive tester TLAT-A11
- Standard roller: 2000 ± 50 g
- Testing stations: 6
- Dimension (L*W*H) tester: 650×210×550 mm (6 stations)
- Weight for stations: 15 kg (6 stations)
Melt flow Indexer TMFI-A10
- Measuring range: 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
- Measuring rate: 0.001 S
- Temperature range: 50 to 400°C
- Temperature precision: ± 0.5°C
Melt flow Indexer TMFI-A11
- Measuring range: 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
- Measuring rate: 0.001 S
- Temperature range: 50 to 400°C
- Temperature precision: ± 0.5°C
Oxygen Index Tester TOIT-A10
- Resolution: 0.1 % O2
- Measuring range: 0 to 100 % O2
- Precision: ± 0.4 % O2
- Response time: < 10 S
Primary adhesive tester TPAT-A10
- Inclined adjustable angle: 0 to 40°
- Panel width: 120 mm
- Test area width: 80 mm
- Standard steel balls: 1/32 to 1 inch
DIN abrasion tester TDAT-A10
- Test arm weight: 2.5 N
- Additional Loads: 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
- Idler: 150 mm
- Abrasion stroke: 40 ± 0.2 M
Mooney viscometer TMV-A10
- Control temperature range: Normal temperature to 200°C
- Temperature display resolution: 0.01°C
- Temperature control accuracy: ± 0.3°
- Calibration accuracy: Mooney value ± 0.5
No rotor rheometer TNRR-A10
- Temperature tester: Room temperature to 200°C
- Temperature display resolution: 0.1°C
- Temperature control accuracy: ≤ ± 0.3°C
- Rotor speed: 100 times/ min
Rubber low temperature brittleness tester TRBT-A10
- Temperature range: -60°C to 0°C
- Temperature accuracy: ± 0.5°C
- Impact speed: 2 m/s ± 0.2 m/s
- Temperature fluctuation: <± 0.5°C
Rubber Low Temperature Brittleness Tester TRBT-A11
- Temperature control range: Room temperature to -70 ℃ (room temperature ≤ 25 ℃）
- Temperature accuracy: ± 0.3 ℃
- Impact speed: 0℃ to -30℃ around 2.5 ℃/min </br> -30℃ to -40℃ around 2.5 ℃/min </br> -40℃ to -70℃ around 2.0 ℃/min</br>
- Max dimension L × W × H: 910 × 510 × 860 mm
Digital Brinell hardness Tester TDBH-A10
- Test force: 612.5 N, 980 N, 1225 N
- Brinell hardness test: 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N
- Hardness measuring area: 8 to 650 HBW (hard metals steel ball)
- Hardness indication: Digital display
Digital low load Vickers Hardness tester TDVH-A10
- Test force: 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N
- Hardness value symbol: HV1, HV5, HV10, HV20, HV30, HV250
- Error range in display: ± 3.0 %, ± 2.0 %
- Hardness indication: Digital display
Portable Vibration Calibrator LPVC-A10
- Frequency (continually adjustable): 10 Hz to1280 Hz + 0.01 %
- Amplitude acceleration ( at 30m/s2 pk ): 40 Hz to 320 Hz + 0.3 dB + 1 digit
- Amplitude velocity ( at 25mm / sec pk ): 40 Hz to 320 Hz + 0.5dB +1 digit
- Amplitude displacement ( at 50 μm pk-pk ): 40 Hz to 320 Hz + 0.5 dB + 1 digit
Rockwell hardness meter (motorized type) TRHM-B10
- Preliminary test force: 98 N
- Total test force: 588, 980, 1471 N
- Brinell hardness test: 306, 613, 1839 N
- Vickers hardness test: 294, 588, 980 N
Soil moisture meter TSMM-A10
- Measurement range: 0 to 80 %
- Resolution: 0.1
- Accuracy: ± 2 % n (non-saturation condition)
- Needle: 280 mm
Soil moisture meter TSMM-A11
- Measurement range: 0 to 90 %
- Resolution: 0.1 or 0.01
- Accuracy: ± 5 % n (non-saturation condition)
- Needle: 235 mm
Soil moisture meter TSMM-A12
- Measurement range: 0 to 60 %
- Resolution: 0.1
- Accuracy: ± 5 % n (non-saturation condition)
- Needle: 280 mm
Soil nutrient tester TSNA-A10
- Measuring range: 0.001 to 9999
- Stability: A (absorbency of light) <0.003 within 3 mins
- Linearity error: <3.0 %
- Repeatability error: A (absorbency of light) <0.005
Soil nutrient tester TSNA-A11
- Measuring range: 0.001 to 9999
- Stability: A (absorbency of light) <0.003 within 3 mins
- Linearity error: <3.0 %
- Repeatability error: A (absorbency of light) <0.005
Soil Salinity tester TSST-A10
- Salinity Measurement range: 0.00 to 19.99 ms/cm
- Measuring accuracy: EC ± 2% full scale
- Temperature Measurement range: -5 to 50°C
- Temperature accuracy: ± 0.5°C
Soil water hardness meter TSHM-A10
- Maximum load: 100 kg ( kg and N can be switched automatically)
- Resolution: 0.01 g
- Accuracy: ± 0.5 %
- Measuring depth: 0 to 40 mm
