Benchtop pH meter LBPM-A11
- pH measurement range: 0.00 to 14.00 pH
- pH accuracy: ± 0.01 pH
- pH resolution: 0.01 pH
- Calibration points: 2 points
Benchtop pH meter LBPM-A20
- pH measurement range: -1.00 to 15.00 pH
- pH accuracy: ± 0.01 pH
- pH resolution: 0.01 pH
- Calibration points: 1-3 points
Benchtop conductivity meter LBCM-A11
- Conductivity measurement range: 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm
- Conductivity accuracy: ± 1 % F.S.
- Conductivity resolution: 0.01, 0.1, 1
- Conductivity calibration solutions: 10 µS / cm , 84 µS / cm, 1413 µS / cm, 12.88 mS / cm, 111.8 mS / cm
Benchtop Conductivity Meter LBCM-A13
- Conductivity measurement range: 0.000 μS/cm to 3000mS/cm
- Resistivity measurement range: 5.00 Ω·cm to 100.0 MΩ·cm
- TDS measurement range: 0.000 mg/L to 1000g/L
- Salinity measurement range: 0.00 to 8.00 %
Benchtop Conductivity Meter LBCM-A14
- Conductivity Mode: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0.01-20.0, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>±1% F.S.</td></tr><tr><td><strong>Conductivity resolution</strong></td><td>0.001, 0.01, 0.1, 1</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 to 3 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS/cm , 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm</td></tr></table>
- TDS Mode: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>TDS measurement Range</strong></td><td>0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)</td></tr><tr><td><strong>TDS Accuracy</strong></td><td>± 1 % F.S.</td></tr><tr><td><strong>TDS Factor</strong></td><td>0.01 to 1.00 (default 0.5)</td></tr><tr><td><strong>TDS Calibration points</strong></td><td>3 points</td></tr></table>
- Temperature Mode: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Temperature range</strong></td><td>0 to 105°C, 32 to 221°F</td></tr><tr><td><strong>Temperature accuracy</strong></td><td>±1°C</td></tr><tr><td><strong>Temperature resolution</strong></td><td>0.1°C, 0.1°F</td></tr><tr><td><strong>Temperature calibration points</strong></td><td>1 point</td></tr><tr><td><strong>Temperature Compensation Range and Mode</strong></td><td>Manual or Automatic, 0 to 100°C , 32 to 212°F</td></tr><tr><td><strong>Temperature coefficient</strong></td><td>0.0 to 10.0 % per °C</td></tr></table>
- Cell constant: K=0.1, 1, 10
Benchtop Ion meter for K, LBIM-A23
- Ion measurement range: K range: 1×10<sup>6</sup> - 1M, 0.04 -39000 ppm
- Ion measurement accuracy: ± 1 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Ag, LBIM-A22
- Ion measurement range: Ag range: 1 × 10<sup>7</sup> - 1 M, 0.01 - 107900 ppm
- Ion measurement accuracy: ± 1 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Br, LBIM-A14
- Ion measurement range: Br range: 5 × 10<sup>6</sup> - 1 M, 0.4 - 79900 ppm
- Ion measurement accuracy: ± 0.5 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Ca, LBIM-A13
- Ion measurement range: Ca range: 5 × 10<sup>7</sup> - 1 M, 0.02 - 4000 ppm
- Ion measurement accuracy: ± 0.5 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Cd, LBIM-A28
- Ion measurement range: Cd range: 1×10<sup>6</sup>– 1M, 0.01-11200 ppm
- Ion measurement accuracy: ± 1 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Cl, LBIM-A10
- Ion measurement range: Cl range: 5 × 10<sup>6</sup> - 1 M, 1.8 - 35500 ppm
- Ion measurement accuracy: ± 0.5 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Cn, LBIM-A21
- Ion measurement range: Cn range: 5 × 10<sup>6</sup> – 0.01 M, 0.2 – 260 ppm
- Ion measurement accuracy: ± 1 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Cu, LBIM-A27
- Ion measurement range: Cu range: 1×10<sup>8</sup> - 1M, 0.06-6400 ppm
- Ion measurement accuracy: ± 1 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for F, LBIM-A11
- Ion measurement range: F range: 1 × 10<sup>6</sup>M – saturation, 0.02 ppm to saturation
- Ion measurement accuracy: ± 0.5 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for I, LBIM-A26
- Ion measurement range: I range: 1×10<sup>8</sup>- 1M, 0.06 -127000 ppm
- Ion measurement accuracy: ± 1 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for Na, LBIM-A12
- Ion measurement range: Na range: 1 × 10<sup>5</sup> - 1 M, 0.1 - 23000 ppm
- Ion measurement accuracy: ± 0.5 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for NH<sub>3</sub> , LBIM-A20
- Ion measurement range: NH<sub>3</sub> range: 1 × 10<sup>6</sup> - 1 M, 0.02 - 17000 ppm
- Ion measurement accuracy: ± 1 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Ion meter for NH<sub>4</sub>, LBIM-A15
- Ion measurement range: NH<sub>4</sub> range: 5 × 10<sup>6</sup> – 1 M, 0.1 – 18000 ppm
- Ion measurement accuracy: ± 0.5 % F.S.
- Resolution: 0.001, 0.01, 0.1, 1
- Calibration points: 2 to 5 points
Benchtop Water hardness meter LBWM-A10
- Water hardness range: 0.05 mmol / L -0.2 mol / L <br/> (CaCO<sub>3</sub>) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L<br/> (German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f
- Accuracy: ± 1 % F.S.
- Calibration points: 2 to 5 points
- Calibration solution: 0.001, 0.01, 0.1 mmol/L, 0.001, 0.01, 0.1 mol/L
Pocket Conductivity tester LPCT-A10
- Conductivity measurement range: 1.0 to 199.9 µS/cm
- Type of conductivity: Low range conductivity
- Conductivity accuracy: ± 1 % F.S.
- Conductivity calibration points: 1 point
Multi purpose Pocket pH tester LPPT-B10
- pH measurement range: pH range: (-1.00) to 15.00 pH
- Shape of electrode: Different electrodes can be connceted via BNC Connector
- pH measurement accuracy: ± 0.01 pH
- Calibration point: 1 - 3 points
Pocket pH tester LPPT-A10
- pH measurement range: 0.0 - 14.00 pH
- Shape of electrode: Round glass pH electrode
- pH measurement accuracy: ± 0.1 pH
- Calibration point: 2 points
Pocket pH tester LPPT-A11
- pH measurement range: 0.0 - 14.00 pH
- Shape of electrode: Flat pH electrode
- pH measurement accuracy: ± 0.1 pH
- Calibration point: 2 points
Pocket pH tester LPPT-A12
- pH measurement range: 0.0 - 14.00 pH
- Shape of electrode: Long distance planar pH electrode
- pH measurement accuracy: ± 0.1 pH
- Calibration point: 2 points
Pocket pH tester LPPT-A20
- pH measurement range: pH range: (-1.00) to 15.00 pH
- Shape of electrode: Round glass pH electrode
- pH measurement accuracy: ± 0.01 pH
- Calibration point: 1 - 3 points
Pocket pH tester LPPT-A21
- pH measurement range: pH range: (-1.00) to 15.00 pH
- Shape of electrode: Flat pH electrode
- pH measurement accuracy: ± 0.01 pH
- Calibration point: 1 - 3 points
Pocket pH tester LPPT-A22
- pH measurement range: pH range: (-1.00) to 15.00 pH
- Shape of electrode: Long distance planar pH electrode
- pH measurement accuracy: ± 0.01 pH
- Calibration point: 1 - 3 points
Pocket pH tester LPPT-A30
- pH measurement range: pH range: (-1.00) to 15.00 pH
- Shape of electrode: Round glass pH electrode
- pH measurement accuracy: ± 0.01 pH
- Calibration point: 1 - 3 points
Multi-range pocket TDS tester LPTS-A20
- TDS range: 0 - 20 ppt
- TDS accuracy: ± 1 % F.S.
- TDS factor: 0.1 to 1.0 (default 0.5)
- Calibration points: 1 - 3 points
Pocket TDS tester LPTS-A10
- TDS range: 0.5 - 100.0 ppm
- TDS accuracy: ± 1 % F.S.
- TDS factor: 0.4 to 1.0 (default 0.5)
- Calibration points: 1 point
Portable Multi-parameter Water Quality Meter LMPWM-A10
- pH mode: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>pH measurement range</strong></td><td>(-2.000) to 20.000 pH</td></tr><tr><td><strong>pH accuracy</strong></td><td>± 0.002 pH</td></tr><tr><td><strong>pH calibration points</strong></td><td>1 - 5 points</td></tr><tr><td><strong>pH calibration solutions</strong></td><td>USA, NIST, DIN or user defined</td></tr></table>
- ORP measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>ORP measurement range</strong></td><td>-1999.9 to 1999.9 mV</td></tr><tr><td><strong>ORP accuracy</strong></td><td>±0.2 mV</td></tr><tr><td><strong>ORP calibration points</strong></td><td>1 point</td></tr><tr><td><strong>ORP calibration solutions</strong></td><td>mV & relative mV</td></tr></table>
- Ion measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Ion measurement range</strong></td><td>0 to 19999 ppm, mg/L, mol/L</td></tr><tr><td><strong>Ion accuracy</strong></td><td>± 0.5 % F.S. (monovalent), ± 1 % F.S. (divalent)</td></tr><tr><td><strong>Ion calibration points</strong></td><td>2 - 5 points</td></tr><tr><td><strong>Ion calibration solutions</strong></td><td>0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol/L, mg/L</td></tr></table>
- Conductivity measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>± 0.5 % F.S.</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 - 5 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm</td></tr><tr><td><strong>Temperature coefficient</strong></td><td>0.0 to 10.0 % / °C</td></tr><tr><td><strong>Compensation modes</strong></td><td>Linear or pre water</td></tr><tr><td><strong>Cell constant</strong></td><td>K = 0.1, 1, 10 or user-defined</td></tr><tr><td><strong>Normalization temperature</strong></td><td>20 °C or 25 °C</td></tr></table>
Portable Multi-parameter Water Quality Meter LMPWM-A11
- pH mode: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>pH measurement range</strong></td><td>(-2.000) to 20.000 pH</td></tr><tr><td><strong>pH accuracy</strong></td><td>± 0.002 pH</td></tr><tr><td><strong>pH calibration points</strong></td><td>1 - 5 points</td></tr><tr><td><strong>pH calibration solutions</strong></td><td>USA, NIST, DIN or user defined</td></tr></table>
- ORP measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>ORP measurement range</strong></td><td>-1999.9 to 1999.9 mV</td></tr><tr><td><strong>ORP accuracy</strong></td><td>±0.2 mV</td></tr><tr><td><strong>ORP calibration points</strong></td><td>1 point</td></tr><tr><td><strong>ORP calibration solutions</strong></td><td>mV & relative mV</td></tr></table>
- Ion measurement: <table class="table table-striped table-bordered table-responsive"></table>
- Conductivity measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>± 0.5 % F.S.</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 - 5 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm</td></tr><tr><td><strong>Temperature coefficient</strong></td><td>0.0 to 10.0 % / °C</td></tr><tr><td><strong>Compensation modes</strong></td><td>Linear or pre water</td></tr><tr><td><strong>Cell constant</strong></td><td>K = 0.1, 1, 10 or user-defined</td></tr><tr><td><strong>Normalization temperature</strong></td><td>20 °C or 25 °C</td></tr></table>
Portable Multi-parameter Water Quality Meter LMPWM-A20
- pH mode: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>pH measurement range</strong></td><td>(-2.000) to 20.000 pH</td></tr><tr><td><strong>pH accuracy</strong></td><td>± 0.002 pH</td></tr><tr><td><strong>pH calibration points</strong></td><td>1 - 5 points</td></tr><tr><td><strong>pH calibration solutions</strong></td><td>USA, NIST, DIN or user defined</td></tr></table>
- ORP measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>ORP measurement range</strong></td><td>-1999.9 to 1999.9 mV</td></tr><tr><td><strong>ORP accuracy</strong></td><td>±0.2 mV</td></tr><tr><td><strong>ORP calibration points</strong></td><td>1 point</td></tr><tr><td><strong>ORP calibration solutions</strong></td><td>mV & relative mV</td></tr></table>
- Conductivity measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>± 0.5 % F.S.</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 - 5 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm</td></tr><tr><td><strong>Temperature coefficient</strong></td><td>0.0 to 10.0 % / °C</td></tr><tr><td><strong>Compensation modes</strong></td><td>Linear or pre water</td></tr><tr><td><strong>Cell constant</strong></td><td>K = 0.1, 1, 10 or user-defined</td></tr><tr><td><strong>Normalization temperature</strong></td><td>20 °C or 25 °C</td></tr></table>
- TDS measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>TDS range</strong></td><td>0-100 ppt. (max. 200 ppt., depending on factor setting)</td></tr><tr><td><strong>TDS accuracy</strong></td><td>± 1 % F.S.</td></tr><tr><td><strong>TDS factor</strong></td><td>0.1 - 1.0 (default 0.5)</td></tr></table>
Portable Multi-parameter Water Quality Meter LMPWM-A21
- pH mode: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>pH measurement range</strong></td><td>(-2.000) to 20.000 pH</td></tr><tr><td><strong>pH accuracy</strong></td><td>± 0.002 pH</td></tr><tr><td><strong>pH calibration points</strong></td><td>1 - 5 points</td></tr><tr><td><strong>pH calibration solutions</strong></td><td>USA, NIST, DIN or user defined</td></tr></table>
- ORP measurement: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>ORP measurement range</strong></td><td>-1999.9 to 1999.9 mV</td></tr><tr><td><strong>ORP accuracy</strong></td><td>±0.2 mV</td></tr><tr><td><strong>ORP calibration points</strong></td><td>1 point</td></tr><tr><td><strong>ORP calibration solutions</strong></td><td>mV & relative mV</td></tr></table>
- Dissolved oxygen: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>DO concentration range</strong></td><td>0.00 to 20.00 mg/L</td></tr><tr><td><strong>DO accuracy</strong></td><td>± 0.2 mg/L</td></tr><tr><td><strong>Calibration points</strong></td><td>1 - 2 points</td></tr><tr><td><strong>Pressure correction</strong></td><td>60.0 to 112.5 kPa, 450 - 850 mmHg</td></tr><tr><td><strong>Salinity correction</strong></td><td>0 to 50 g/L</td></tr><tr><td><strong>% Saturation of Oxygen</strong></td><td>0.0 to 200.0 %</td></tr><tr><td><strong>Accuracy</strong></td><td>± 2.0 %</td></tr></table>
- Temperature compensation: 0 to 100 °C, 32 to 212 °F, Manual or Automatic
Portable water hardness meter LPWM-A10
- Water hardness range: 0.05 mmol / L - 0.2 mol / L<br/> (CaCO<sub>3</sub>) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L<br/> (German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f
- Accuracy: ± 1 % F.S.
- Calibration points: 2 to 5 points
- Calibration solution: 0.001, 0.01, 0.1 mmol / L, 0.001, 0.01, 0.1 mol / L
Multi parameter water quality analyzer LMWA-A10
- COD: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>COD determination range</strong></td><td>2 to 10000 mg/ L</td></tr><tr><td><strong>COD measurement accuracy</strong></td><td>COD < 50 mg/ L, ≤ ± 10 % and COD > 50 mg/ L, ≤ ± 5 %</td></tr><tr><td><strong>COD minimum detection limit</strong></td><td>0.1 mg/ L</td></tr><tr><td><strong>COD measurement time</strong></td><td>20 minutes</td></tr><tr><td><strong>COD repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Consumables for colorimetric COD measurement</strong></td><td>Colorimetric tubes and Cuvette</td></tr><tr><td><strong>COD reactor digestion temperature</strong></td><td>165 ± 0.5°C</td></tr><tr><td><strong>COD reactor digestion time</strong></td><td>10 min</td></tr><tr><td><strong>COD reactor time setting switches</strong></td><td>3 pcs</td></tr><tr><td><strong>Anti-chlorine interference</strong></td><td>(Cl) < 1000 mg/ L No effect</td></tr></table>
- Ammonia nitrogen: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Ammonia nitrogen determination range</strong></td><td>0.02 to 60 mg/ L</td></tr><tr><td><strong>Ammonia nitrogen measurement accuracy</strong></td><td>≤ ± 10 %</td></tr><tr><td><strong>Ammonia nitrogen minimum detection limit</strong></td><td>0.01 mg/ L</td></tr><tr><td><strong>Ammonia nitrogen measurement time</strong></td><td>10 to 15 minutes</td></tr><tr><td><strong>Ammonia nitrogen repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Consumables for colorimetric ammonia nitrogen measurement</strong></td><td>Colorimetric tubes and Cuvette</td></tr><tr><td><strong>Ammonia nitrogen reactor time setting switches</strong></td><td>3 pcs</td></tr></table>
- Total phosphorous: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Total phosphorous determination range</strong></td><td>0.002 to 20 mg/ L</td></tr><tr><td><strong>Total phosphorous total phosphorous measurement accuracy</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Total phosphorous minimum detection limit</strong></td><td>0.001 mg/ L</td></tr><tr><td><strong>Total phosphorous measurement time</strong></td><td>35 to 50 minutes</td></tr><tr><td><strong>Total phosphorous repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Consumables for colorimetric total phosphorous measurement</strong></td><td>Colorimetric tubes and Cuvette</td></tr><tr><td><strong>Total phosphorous reactor digestion temperature</strong></td><td>120 ± 0.5°C</td></tr><tr><td><strong>Total phosphorous reactor digestion time</strong></td><td>30 min</td></tr><tr><td><strong>Total phosphorous reactor time setting switches</strong></td><td>3 pcs</td></tr></table>
- Turbidity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Turbidity determination range</strong></td><td>0.5 to 400 NTU</td></tr><tr><td><strong>Turbidity measurement accuracy</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Turbidity minimum detection limit</strong></td><td>0.1 NTU</td></tr><tr><td><strong>Turbidity measurement time</strong></td><td>1 minute</td></tr><tr><td><strong>Turbidity repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Consumables for colorimetric turbidity measurement</strong></td><td>Colorimetric Cuvette</td></tr></table>
Multi parameter water quality analyzer LMWA-A11
- COD: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>COD determination range</strong></td><td>5 to 5000 mg/ L</td></tr><tr><td><strong>COD measurement accuracy</strong></td><td>COD < 50 mg/ L, ≤ ± 10 % and COD > 50 mg/ L, ≤ ± 5 %</td></tr><tr><td><strong>COD minimum detection limit</strong></td><td>0.1 mg/ L</td></tr><tr><td><strong>COD measurement time</strong></td><td>20 minutes</td></tr><tr><td><strong>COD repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Processing sample number per batch</strong></td><td>12 pcs</td></tr><tr><td><strong>Consumables for colorimetric COD measurement</strong></td><td>Colorimetric tubes and Cuvette</td></tr><tr><td><strong>COD reactor digestion temperature</strong></td><td>165 ± 0.5°C</td></tr><tr><td><strong>COD reactor digestion time</strong></td><td>10 min</td></tr><tr><td><strong>COD reactor time setting switches</strong></td><td>3 pcs</td></tr><tr><td><strong>Anti-chlorine interference</strong></td><td>(Cl) < 1000 mg/ L No effect</td></tr></table>
- Ammonia nitrogen: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Ammonia nitrogen determination range</strong></td><td>0.02 to 30 mg/ L</td></tr><tr><td><strong>Ammonia nitrogen measurement accuracy</strong></td><td>≤ ± 10 %</td></tr><tr><td><strong>Ammonia nitrogen minimum detection limit</strong></td><td>0.01 mg/ L</td></tr><tr><td><strong>Ammonia nitrogen measurement time</strong></td><td>10 to 15 minutes</td></tr><tr><td><strong>Ammonia nitrogen repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Processing sample number per batch</strong></td><td>20 pcs</td></tr><tr><td><strong>Consumables for colorimetric ammonia nitrogen measurement</strong></td><td>Colorimetric tubes and Cuvette</td></tr><tr><td><strong>Ammonia nitrogen reactor time setting switches</strong></td><td>3 pcs</td></tr></table>
- Total phosphorous: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Total phosphorous determination range</strong></td><td>0.002 to 10 mg/ L</td></tr><tr><td><strong>Total phosphorous total phosphorous measurement accuracy</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Total phosphorous minimum detection limit</strong></td><td>0.001 mg/ L</td></tr><tr><td><strong>Total phosphorous measurement time</strong></td><td>35 to 50 minutes</td></tr><tr><td><strong>Total phosphorous repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Processing sample number per batch</strong></td><td>12 pcs</td></tr><tr><td><strong>Consumables for colorimetric total phosphorous measurement</strong></td><td>Colorimetric tubes and Cuvette</td></tr><tr><td><strong>Total phosphorous reactor digestion temperature</strong></td><td>120 ± 0.5°C</td></tr><tr><td><strong>Total phosphorous reactor digestion time</strong></td><td>30 min</td></tr><tr><td><strong>Total phosphorous reactor time setting switches</strong></td><td>3 pcs</td></tr></table>
- Turbidity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Turbidity determination range</strong></td><td>0.5 to 400 NTU</td></tr><tr><td><strong>Turbidity measurement accuracy</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Turbidity minimum detection limit</strong></td><td>0.1 NTU</td></tr><tr><td><strong>Turbidity measurement time</strong></td><td>1 minute</td></tr><tr><td><strong>Turbidity repeatability</strong></td><td>≤ ± 5 %</td></tr><tr><td><strong>Consumables for colorimetric turbidity measurement</strong></td><td>Colorimetric Cuvette</td></tr></table>
Bench top Turbidity Meter (with built-in printer) LTM-C10
- Measuring range (NTU): 0 to 100, 0 to 200
- Minimum readout value (NTU): 0.01
- Calibration point: 2
- Sample volume: 18 to 20 ml
Bench top Turbidity Meter (with built-in printer) LTM-C11
- Measuring range (NTU): 0 to 100, 0 to 200, 0 to 500
- Minimum readout value (NTU): 0.01
- Calibration point: 3
- Sample volume: 18 to 20 ml
Bench top Turbidity Meter (with built-in printer) LTM-C12
- Measuring range (NTU): 0 to 10, 0 to 100, 0 to 200, 0 to 500
- Minimum readout value (NTU): 0.001
- Calibration point: 4
- Sample volume: 18 to 20 ml
Bench top Turbidity Meter (with built-in printer) LTM-C13
- Measuring range (NTU): 0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000
- Minimum readout value (NTU): 0.01
- Calibration point: 5
- Sample volume: 18 to 20 ml
Bench top Turbidity Meter (with built-in printer) LTM-C14
- Measuring range (NTU): 0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000
- Minimum readout value (NTU): 0.001
- Calibration point: 5
- Sample volume: 18 to 20 ml
Bench top Turbidity Meter (with built-in printer) LTM-C15
- Measuring range (NTU): 0 to 10, 0 to 100
- Minimum readout value (NTU): 0.001
- Calibration point: 2
- Sample volume: 18 to 20 ml
Bench top Turbidity Meter LTM-B10
- Measuring range (NTU): 0 to 100
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 1
- Sample volume: 5 to 10 ml
Bench top Turbidity Meter LTM-B11
- Measuring range (NTU): 0 to 50, 0 to 100, 0 to 200
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 3
- Sample volume: 5 to 10 ml
Bench top Turbidity Meter LTM-B12
- Measuring range (NTU): 0 to 50, 0 to 100, 0 to 200, 0 to 400
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 4
- Sample volume: 5 to 10 ml
Bench top Turbidity Meter LTM-B13
- Measuring range (NTU): 0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 5
- Sample volume: 5 to 10 ml
Bench top Turbidity Meter LTM-B14
- Measuring range (NTU): 0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800, 0 to 1000
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 6
- Sample volume: 5 to 10 ml
Portable Turbidity Meter LTM-A10
- Measuring range (NTU): 0 to 200
- Minimum readout value (NTU): 0.1
- Calibration point: Nil
- Sample volume: 5 to 10 ml
Portable Turbidity Meter LTM-A11
- Measuring range (NTU): 0 to 100, 0 to 200
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 4
- Sample volume: 5 to 10 ml
Portable Turbidity Meter LTM-A12
- Measuring range (NTU): 0 to 100, 100 to 400
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 5
- Sample volume: 5 to 10 ml
Portable Turbidity Meter LTM-A13
- Measuring range (NTU): 0 to 100, 100 to 500
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 6
- Sample volume: 5 to 10 ml
Portable Turbidity Meter LTM-A14
- Measuring range (NTU): 0 to 100, 100 to 800
- Minimum readout value (NTU): 0.01, 0.1
- Calibration point: 6
- Sample volume: 5 to 10 ml
Benchtop Multi-parameter Water Quality Meter LMPWM-A30
- pH Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>pH range </td> <td style=min-width:50px>-2.00 to 20.00 pH</td> </tr> <tr> <td style=min-width:50px>pH Accuracy </td> <td style=min-width:50px>± 0.002 pH</td> </tr> <tr> <td style=min-width:50px>pH Resolution </td> <td style=min-width:50px>0.1/0.01/0.001 pH, selectable</td> </tr> <tr> <td style=min-width:50px>pH Calibration Points </td> <td style=min-width:50px>1 to 5 Points</td> </tr> <tr> <td style=min-width:50px>pH Buffer Solutions </td> <td style=min-width:50px>USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers</td> </tr> </table>
- mV Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>mV Range </td> <td style=min-width:50px>-1999.9 to 1999.9 mV</td> </tr> <tr> <td style=min-width:50px>mV Accuracy </td> <td style=min-width:50px>± 0.2 mV</td> </tr> <tr> <td style=min-width:50px>mV Resolution </td> <td style=min-width:50px>0.1/1 mV, selectable</td> </tr> <tr> <td style=min-width:50px>mV Calibration Points</td> <td style=min-width:50px>1 Point</td> </tr> </table>
- Conductivity Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>Conductivity Range </td> <td style=min-width:50px>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm</td> </tr> <tr> <td style=min-width:50px>Conductivity Accuracy </td> <td style=min-width:50px>± 0.5% F.S.</td> </tr> <tr> <td style=min-width:50px>Conductivity Resolution</td> <td style=min-width:50px>0.01/0.1/1</td> </tr> <tr> <td style=min-width:50px>Conductivity Calibration Points</td> <td style=min-width:50px>1 to 5 Points</td> </tr> <tr> <td style=min-width:50px>Conductivity Solutions</td> <td style=min-width:50px>10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm</td> </tr> <tr> <td style=min-width:50px>Conductivity Temperature coefficient </td> <td style=min-width:50px>0.0 to 10.0 %/°C</td> </tr> <tr> <td style=min-width:50px>Compensation mode </td> <td style=min-width:50px>Linear or Pure Water</td> </tr> <tr> <td style=min-width:50px>Cell Constant</td> <td style=min-width:50px>K=0.1, 1, 10 or Custom</td> </tr> <tr> <td style=min-width:50px>Reference temperature </td> <td style=min-width:50px>20 or 25°C</td> </tr> </table>
- TDS Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>TDS Range</td> <td style=min-width:50px>0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)</td> </tr> <tr> <td style=min-width:50px>TDS Accuracy </td> <td style=min-width:50px>± 1 % F.S.</td> </tr> <tr> <td style=min-width:50px>TDS Factor </td> <td style=min-width:50px>0.1 to 1.0 (default 0.5)</td> </tr> </table>
Benchtop Multi-parameter Water Quality Meter LMPWM-A31
- pH Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>pH range </td> <td style=min-width:50px>-2.00 to 20.00 pH</td> </tr> <tr> <td style=min-width:50px>pH Accuracy </td> <td style=min-width:50px>± 0.002 pH</td> </tr> <tr> <td style=min-width:50px>pH Resolution </td> <td style=min-width:50px>0.1/0.01/0.001 pH, selectable</td> </tr> <tr> <td style=min-width:50px>pH Calibration Points </td> <td style=min-width:50px>1 to 5 Points</td> </tr> <tr> <td style=min-width:50px>pH Buffer Solutions </td> <td style=min-width:50px>USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers</td> </tr> </table>
- mV Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>mV Range </td> <td style=min-width:50px>-1999.9 to 1999.9 mV</td> </tr> <tr> <td style=min-width:50px>mV Accuracy </td> <td style=min-width:50px>± 0.2 mV</td> </tr> <tr> <td style=min-width:50px>mV Resolution </td> <td style=min-width:50px>0.1/1 mV, selectable</td> </tr> <tr> <td style=min-width:50px>mV Calibration Points</td> <td style=min-width:50px>1 Point</td> </tr> </table>
- Conductivity Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>Conductivity Range </td> <td style=min-width:50px>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm</td> </tr> <tr> <td style=min-width:50px>Conductivity Accuracy </td> <td style=min-width:50px>± 0.5% F.S.</td> </tr> <tr> <td style=min-width:50px>Conductivity Resolution</td> <td style=min-width:50px>0.01/0.1/1</td> </tr> <tr> <td style=min-width:50px>Conductivity Calibration Points</td> <td style=min-width:50px>1 to 5 Points</td> </tr> <tr> <td style=min-width:50px>Conductivity Solutions</td> <td style=min-width:50px>10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm</td> </tr> <tr> <td style=min-width:50px>Conductivity Temperature coefficient </td> <td style=min-width:50px>0.0 to 10.0 %/°C</td> </tr> <tr> <td style=min-width:50px>Compensation mode </td> <td style=min-width:50px>Linear or Pure Water</td> </tr> <tr> <td style=min-width:50px>Cell Constant</td> <td style=min-width:50px>K=0.1, 1, 10 or Custom</td> </tr> <tr> <td style=min-width:50px>Reference temperature </td> <td style=min-width:50px>20 or 25°C</td> </tr> </table>
- TDS Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>TDS Range</td> <td style=min-width:50px>0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)</td> </tr> <tr> <td style=min-width:50px>TDS Accuracy </td> <td style=min-width:50px>± 1 % F.S.</td> </tr> <tr> <td style=min-width:50px>TDS Factor </td> <td style=min-width:50px>0.1 to 1.0 (default 0.5)</td> </tr> </table>
Benchtop Multi-parameter Water Quality Meter LMPWM-A32
- pH Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>pH range </td> <td style=min-width:50px>-2.00 to 20.00 pH</td> </tr> <tr> <td style=min-width:50px>pH Accuracy </td> <td style=min-width:50px>± 0.002 pH</td> </tr> <tr> <td style=min-width:50px>pH Resolution </td> <td style=min-width:50px>0.1/0.01/0.001 pH, selectable</td> </tr> <tr> <td style=min-width:50px>pH Calibration Points </td> <td style=min-width:50px>1 to 5 Points</td> </tr> <tr> <td style=min-width:50px>pH Buffer Solutions </td> <td style=min-width:50px>USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers</td> </tr> </table>
- mV Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>mV Range </td> <td style=min-width:50px>-1999.9 to 1999.9 mV</td> </tr> <tr> <td style=min-width:50px>mV Accuracy </td> <td style=min-width:50px>± 0.2 mV</td> </tr> <tr> <td style=min-width:50px>mV Resolution </td> <td style=min-width:50px>0.1/1 mV, selectable</td> </tr> <tr> <td style=min-width:50px>mV Calibration Points</td> <td style=min-width:50px>1 Point</td> </tr> </table>
- Conductivity Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>Conductivity Range </td> <td style=min-width:50px>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm</td> </tr> <tr> <td style=min-width:50px>Conductivity Accuracy </td> <td style=min-width:50px>± 0.5% F.S.</td> </tr> <tr> <td style=min-width:50px>Conductivity Resolution</td> <td style=min-width:50px>0.01/0.1/1</td> </tr> <tr> <td style=min-width:50px>Conductivity Calibration Points</td> <td style=min-width:50px>1 to 5 Points</td> </tr> <tr> <td style=min-width:50px>Conductivity Solutions</td> <td style=min-width:50px>10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm</td> </tr> <tr> <td style=min-width:50px>Conductivity Temperature coefficient </td> <td style=min-width:50px>0.0 to 10.0 %/°C</td> </tr> <tr> <td style=min-width:50px>Compensation mode </td> <td style=min-width:50px>Linear or Pure Water</td> </tr> <tr> <td style=min-width:50px>Cell Constant</td> <td style=min-width:50px>K=0.1, 1, 10 or Custom</td> </tr> <tr> <td style=min-width:50px>Reference temperature </td> <td style=min-width:50px>20 or 25°C</td> </tr> </table>
- Dissolved Oxygen Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>Dissolved Oxygen Range </td> <td style=min-width:50px>0.00 to 20.00 mg/ L</td> </tr> <tr> <td style=min-width:50px>Dissolved Oxygen Accuracy </td> <td style=min-width:50px>± 0.2 mg/ L</td> </tr> <tr> <td style=min-width:50px>Dissolved Oxygen Resolution</td> <td style=min-width:50px>0.1/ 0.01 mg/ L, selectable</td> </tr> <tr> <td style=min-width:50px>Dissolved Oxygen Calibration Points</td> <td style=min-width:50px>1 or 2 Points</td> </tr> <tr> <td style=min-width:50px>% Saturation Range</td> <td style=min-width:50px>0.0 to 200.0 % with ± 2 % accuracy</td> </tr> <tr> <td style=min-width:50px>Pressure correction </td> <td style=min-width:50px>60 to 112.5 kPa, 450 to 850 mmHg</td> </tr> <tr> <td style=min-width:50px>Salinity correction </td> <td style=min-width:50px>0 to 50 g/ L</td> </tr> </table>
Benchtop Multi-parameter Water Quality Meter LMPWM-A40
- pH Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>pH range </td> <td style=min-width:50px>-2.00 to 20.00 pH</td> </tr> <tr> <td style=min-width:50px>pH Accuracy </td> <td style=min-width:50px>± 0.002 pH</td> </tr> <tr> <td style=min-width:50px>pH Resolution </td> <td style=min-width:50px>0.1/0.01/0.001 pH, selectable</td> </tr> <tr> <td style=min-width:50px>pH Calibration Points </td> <td style=min-width:50px>1 to 5 Points</td> </tr> <tr> <td style=min-width:50px>pH Buffer Solutions </td> <td style=min-width:50px>USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers</td> </tr> </table>
- ORP Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>mV Range </td> <td style=min-width:50px>± 2000 mV</td> </tr> <tr> <td style=min-width:50px>mV Accuracy </td> <td style=min-width:50px>± 0.2 mV</td> </tr> <tr> <td style=min-width:50px>mV Resolution </td> <td style=min-width:50px>0.1 mV, selectable</td> </tr> <tr> <td style=min-width:50px>mV Calibration Points</td> <td style=min-width:50px>1 Point, only for relative mode</td> </tr> </table>
- Ion Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>Ion measurement range </td> <td style=min-width:50px>0.01 to 30000 ppm, mg/l, mol/l, mmol/l (refer Range of ion selection) </td> </tr> <tr> <td style=min-width:50px>Ion measurement accuracy</td> <td style=min-width:50px>±0.5% F.S (Monovalent), ±1% F.S (Divalent)</td> </tr> <tr> <td style=min-width:50px>Ion measurement resolution</td> <td style=min-width:50px>0.001/0.01/0.1/1</td> </tr> <tr> <td style=min-width:50px>Ion measurement calibration points</td> <td style=min-width:50px>2 to 5 points</td> </tr> <tr> <td style=min-width:50px>Ion measurement calibration solutions</td> <td style=min-width:50px>0.001/0.01/0.1/1/10/100/1000/10000 ppm, mg/L, mol/L</td> </tr> <tr> <td style=min-width:50px>Ion measurement methods</td> <td style=min-width:50px>Direct reading, Known addition, Known subtraction, Sample addition, Sample subtraction</td> </tr> </table>
- Water Hardness Mode: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>Water hardness measurement range </td> <td style=min-width:50px>0.05-200mmol/L, 0-1120°dH, 0-1404°e, 0-2000°fH, 0-8000mg/L (Ca2+), 0~19999mg/L (CaCO3)</td> </tr> <tr> <td style=min-width:50px>Water hardness measurement accuracy</td> <td style=min-width:50px>±1% F.S</td> </tr> <tr> <td style=min-width:50px>Water hardness measurement resolution</td> <td style=min-width:50px>0.001/0.01/0.1/1</td> </tr> <tr> <td style=min-width:50px>Water hardness calibration points</td> <td style=min-width:50px>2 to 5 points</td> </tr> <tr> <td style=min-width:50px>Water hardness calibration solutions</td> <td style=min-width:50px>0.01/0.1/1/10/100 mmol/L</td> </tr> </table>
BOD Meter LBOD-A10
- Determination range: <table cellspacing=0 border=1> <tr> <td style=min-width:50px>0 to 35 mg/L, 0 to 70 mg/ L, 0 to 350 mg/L, 0 to 700 mg/L (without dilution)</td> </tr> <tr> <td style=min-width:50px>0 to 4000 mg/ L (need to dilute) (subsection measurement)</td> </tr> </table>
- Measurement error: Less or less than 10 %
- Sample container/ bottle quantity: 1 to 6
- Sample container/ bottle Capacity: 1000 ml
Portable Conductivity Meter LPCM-A10
- Conductivity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>±0.5% F.S</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 to 3 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom</td></tr><tr><td><strong>Conductivity resolution</strong></td><td>0.001, 0.01, 0.1, 1</td></tr></table>
- Temperature: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Temperature measuring range</strong></td><td>0 105 °C, 32 to 221 °F</td></tr><tr><td><strong>Temperature measuring accuracy</strong></td><td>± °0.5 C, ± 0.9 °F</td></tr><tr><td><strong>Temperature calibration points</strong></td><td>1 point</td></tr><tr><td><strong>Temperature resolution</strong></td><td>0.1 °C, 0.1 °F</td></tr></table>
- Temperature compensation: 0 to 100 °C, 32 to 212 ° F, Manual or Automatic
- Temperature coefficient: Linear
Portable Conductivity Meter LPCM-A11
- Conductivity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>±0.5% F.S</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 to 5 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom</td></tr><tr><td><strong>Conductivity resolution</strong></td><td>0.001, 0.01, 0.1, 1</td></tr></table>
- TDS: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>TDS range</strong></td><td>0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)</td></tr><tr><td><strong>TDS accuracy</strong></td><td>±1 % F.S</td></tr><tr><td><strong>TDS factor</strong></td><td>0.01 to 1.00 (Default 0.5)</td></tr><tr><td><strong>TDS resolution</strong></td><td>0.01, 0.1, 1</td></tr></table>
- Temperature: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Temperature measuring range</strong></td><td>0 105 °C, 32 to 221 °F</td></tr><tr><td><strong>Temperature measuring accuracy</strong></td><td>± °0.5 C, ± 0.9 °F</td></tr><tr><td><strong>Temperature calibration points</strong></td><td>1 point</td></tr><tr><td><strong>Temperature resolution</strong></td><td>0.1 °C, 0.1 °F</td></tr></table>
- Temperature compensation: 0 to 100 °C, 32 to 212 ° F, Manual or Automatic
Portable Conductivity Meter LPCM-A12
- Conductivity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>±0.5% F.S</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 to 5 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom</td></tr><tr><td><strong>Conductivity resolution</strong></td><td>0.001, 0.01, 0.1, 1</td></tr></table>
- Salinity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Salinity range</strong></td><td>0.00 to 80.00 ppt, 0.00 to 42.00 psu</td></tr><tr><td><strong>Salinity accuracy</strong></td><td>±1% F.S</td></tr><tr><td><strong>Salinity measurement modes</strong></td><td>Practical Salinity (psu) or Natural Seawater (ppt)</td></tr><tr><td><strong>Salinity resolution</strong></td><td>0.01, 0.1, 1</td></tr></table>
- Temperature: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Temperature measuring range</strong></td><td>0 105 °C, 32 to 221 °F</td></tr><tr><td><strong>Temperature measuring accuracy</strong></td><td>± °0.5 C, ± 0.9 °F</td></tr><tr><td><strong>Temperature calibration points</strong></td><td>1 point</td></tr><tr><td><strong>Temperature resolution</strong></td><td>0.1 °C, 0.1 °F</td></tr></table>
- Temperature compensation: 0 to 100 °C, 32 to 212 ° F, Manual or Automatic
Portable Conductivity Meter LPCM-A13
- Conductivity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Conductivity measurement range</strong></td><td>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm</td></tr><tr><td><strong>Conductivity accuracy</strong></td><td>±0.5% F.S</td></tr><tr><td><strong>Conductivity calibration points</strong></td><td>1 to 5 points</td></tr><tr><td><strong>Conductivity calibration solutions</strong></td><td>10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom</td></tr><tr><td><strong>Conductivity resolution</strong></td><td>0.001, 0.01, 0.1, 1</td></tr></table>
- TDS: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>TDS range</strong></td><td>0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)</td></tr><tr><td><strong>TDS accuracy</strong></td><td>±1 % F.S</td></tr><tr><td><strong>TDS factor</strong></td><td>0.01 to 1.00 (Default 0.5)</td></tr><tr><td><strong>TDS resolution</strong></td><td>0.01, 0.1, 1</td></tr></table>
- Salinity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Salinity range</strong></td><td>0.00 to 80.00 ppt, 0.00 to 42.00 psu</td></tr><tr><td><strong>Salinity accuracy</strong></td><td>±1% F.S</td></tr><tr><td><strong>Salinity measurement modes</strong></td><td>Practical Salinity (psu) or Natural Seawater (ppt)</td></tr><tr><td><strong>Salinity resolution</strong></td><td>0.01, 0.1, 1</td></tr></table>
- Resistivity: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Resistivity range</strong></td><td>0.00 to 20 MΩ</td></tr><tr><td><strong>Resistivity accuracy</strong></td><td>±1% F.S</td></tr><tr><td><strong>Resistivity resolution</strong></td><td>0.01, 0.1, 1</td></tr></table>
Portable Chlorine Meter LPCL-A10
- Residual chlorine/total chlorine: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Range</strong></td><td>0.00 to 5.00 mg/L</td></tr><tr><td><strong>Accuracy</strong></td><td>0.001 mg/L 0.001 ABS</td></tr><tr><td><strong>Repeatability Lower detection limit</strong></td><td>≤0.02 mg/L</td></tr></table>
- Chlorine dioxide: <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Range</strong></td><td>0.00 to 10.00 mg/L</td></tr><tr><td><strong>Resolution</strong></td><td>0.001 mg/L 0.001 ABS</td></tr><tr><td><strong>Accuracy</strong></td><td>≤2 mg/L: ±0.10 mg/L ˃2 mg/L: ±5 %</td></tr><tr><td><strong>Lower detection limit</strong></td><td>≤0.04 mg/L</td></tr></table>
- Light source: LED
- Wavelength of light: 515 nm