Share :
Type III Water Purification System LHWP-A11 is a modular design which meets the needs of basic laboratory water purifier. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. These systems produce and reject water at the same time .Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance
Available Range :
Output of Pure water : ≥ 10 L / hr. Output of Pure water : ≥ 20 L / hr. Output of Pure water : ≥ 30 L / hr. Output of Pure water : ≥ 40 L / hr. Output of Pure water : ≥ 50 L / hr. Output of Pure water : ≥ 10 L / hr.| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Single Pass RO system |
| Water intake flowrate | ≥ 1- 1.5 L / min |
| Conductivity at 25 °C | < 10 µs / cm |
| pH | 5.0 – 7.5 |
| Oxidizabes | ≤ 0.4 mg / L |
| Evaporation residue | ≤ 2.0 mg / L |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 150 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 30 kg |
- Advanced Single Pass reverse osmosis system for excellent water quality
- Type III level water produced
- Source of inlet water – Tap water
- Benchtop model
- LCD display to monitor the intake of water pressure and various parameters intuitively
- Anti-fouling RO membrane prevention programme
- Online monitoring of water resistance
- Ease of cleansing , disinfecting and draining waste water
- Micro filter membrane to filter out pollutants
- Automatic RO membrane antiscale flushing to extend the life of the RO membrane
Type I and Type III Water Purification System
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
Type II Water Purification System
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
Type III Water Purification System
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Radio Frequency Identification Water Purification System
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
UV Water Purification System
UV water purification systems, with tank capacities ranging from 30 to 80 liters, destroy the DNA of microorganisms, rendering the water contaminant-free. It is cost effective and environment friendly way for cleaning water.
Popular Products
Categories
Navigation
Contact Us Map