Share :
Water Purification System LWPS-A11 mainly consists of two stages of water quality and its feed water is tap water. It follows type III and type I systems. Features pretreatment system, RO system, ultrapure water system conveying unit and control system. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.
Available Range :
Water quality : One stage (Type I) Water quality : Two stage(Type III and type I) Output 2nd stage RO water : 90 liters/hour Output 2nd stage RO water : 90 liters/hour| Water quality | Two stage(Type III and type I) |
| Feed water | Tap waterTDS≤400ppm Water temperature: 5-40℃ Type 3 water ≥10L/h |
| Conectivity | <5 μs/cm@25℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| TOC | < 5ppb |
| Bacteria | < 0.1 cfu/ml |
| Endotoxin | < 0.001 EU/ml |
| Particle | ( > 0.22μm) <1/ml |
| Absorbance | (254nm,1cm optical distance) < 0.001 EU/ml |
| Reactive Silica(SiO2) | < 0.01 ppm |
| RNases | < 0.01 ng/ml |
| DNases | < 4 pg/μl |
| Temperature | 5 ℃ ~ 40 ℃ |
| Humidity | 10 % ~ 80 % |
| Water production rate | Type 1 water flow rate: 1-1.5L/min |
| Micro filtration | Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter |
| Power supply | 230 V/50 Hz 150 W |
| Main body Dimension (L × W × H) | 340 × 550 × 530 mm (bench type) |
- Millipore BioPak UF membrane to reduce the pyrogen, RNase, DNase
- Ultra-purification system: Millipore ion exchange resin cartridge and special flow design, high ultra-purify efficiency
- Effectively remove the trace ions in water; guarantee the stability of water quality
- Micro filtration: Making the particles content (larger than 0.22μm) is <1/ml and bacteria less than 0.1CFU/ml
- Built-in manual water cycling program and ultrapure water auto-cycle program to keep the water quality of ultrapure water
- Water resistance on-line monitoring, realizing man-machine conversation
- System can be installed on the lab bench
- 30L PE water reservoir with vent valve
Type I and Type III Water Purification System
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
Type II Water Purification System
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
Type III Water Purification System
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Radio Frequency Identification Water Purification System
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
UV Water Purification System
UV water purification systems, with tank capacities ranging from 30 to 80 liters, destroy the DNA of microorganisms, rendering the water contaminant-free. It is cost effective and environment friendly way for cleaning water.
Popular Products
Categories
Navigation
Contact Us Map