This device is specifically designed to detect the concentration of ozone with the help of ozone detector. Along with low maintenance and noiseless generator this machine has a well-built corrosion resistant body.
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature fluctuation | ± 0.5 ℃ |
| Speed rate for cooling | Ambient ~ 0 ℃ within 20 min |
| Timing range | 0 ~ 999 hours |
| Ozone concentration | 1 ~ 1000PPHM |
| Sample holder rotate speed | 0 ~ 10 r/min (adjustable) |
| Clamps tensile stretch | 5 % ~ 35 % |
| Max. ozone concentration | 120 g O<sub>3</sub>/m³ |
| Ozone output | 3.5 g O<sub>3</sub>/h (oxygen input, flow rate 100L/h) |
| Nominal power | 5500 W |
| Internal dimensions | 400 × 500 × 500 mm |
| Overall dimensions (mm) | 860 × 1050 × 1620 mm |
| Power & voltage | AC 380 V 50Hz |
- Use flat shelf for sample placing
- PID programmable controller with LED touch screen display
- Equipped with UV detector to detect the concentration of ozone
- Designed with combination of three control systems- PLC, HMI and SOC
- Incorporated with protection module for safety voltage
- Solid and durable structured closed-type compressor unit
- User-friendly and reliable
- Stable and require low maintenance
- Consists of highly efficient low noise ozone generator
- Made up of corrosion resistant stainless steel body
Ozone Test Chamber
Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.
Ozone Test Chamber LOC-A13
- Diameter of holder (mm)
- 700
- Length of each side (mm)
- 350
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A14
- Diameter of holder (mm)
- 900
- Length of each side (mm)
- 460
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A12
- Diameter of holder (mm)
- 600
- Length of each side (mm)
- 220
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A11
- Diameter of holder (mm)
- 400
- Length of each side (mm)
- 180
- Temperature range
- 0℃ ~ 100℃
Drug Test Chamber
Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.
Drug Stability Test Chamber LDST-A24
- Interior Volume
- 1000 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A20
- Interior Volume
- 100 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A11
- Volume
- 250 L
- Temperature Range
- 0 - 65 °C
- Temperature Fluctuation
- ± 0.5 °C
Drug Stability Test Chamber LDST-A21
- Interior Volume
- 225 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Plant Growth Chamber
Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.
Salt Spray Test Chamber
Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.
Salt Spray Test Chamber LSSC-A14
- Testing room capacity
- 1030 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A10
- Testing room capacity
- 110 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95 to 98% RH
Salt Spray Test Chamber LSSC-A13
- Testing room capacity
- 780 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A11
- Testing room capacity
- 326 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95 to 98% RH
Sand Test Chamber
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
Sand and Dust Test Chamber LSC-A10
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A13
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A12
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A11
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um