Tube Furnace LTF-B33


Share :


Tube Furnace LTF-B33


Tube Furnace LTF-B33 is a 1200°C continuous working temperature comprised scientific design tube furnace comes with 810 mm of tube length with 75 mm diameter and 600 mm heated zone. Incorporated with software based PID control with 4 lines LCD display, it offers 1 to 20°C/min of thermal rate. Designed ergonomically with K-type thermocouple and thermal shock resistant tubes, it provides 32 steps heating program with 5 preset programs. With dual shell housing and durable inside lining of light insulating bricks, it is provided with gas inlet and evacuation system option for protective atmosphere.



Available Range :

Type : Standard Type : Extended Type : Standard Type : Extended Type : Standard Type : Extended
TypeScientific
Program memories5
Heating program32 steps
Working temperature1200°C
Tube length810 mm
Tube diameter75 mm
Heated zone600 mm
Thermal rate1 to 20°C/min
Homogeneous Hot Zone200 mm at ±10°C
ThermocoupleK-type
Heating elementFe-Cr-Al
Inner insulation materialCeramic-fibre blanket
HousingSteel sheet with epoxy powder coating
Display4 lines
Maximum current12A
Power2500 W
Dimension (W×D×H)794×449×529 mm
Net weight46 kg
Packaging dimension (W×D×H)835×495×688 mm
Gross weight56 kg
  • Scientific design tube furnace with 810 mm of tube length with 75 mm diameter and 600 mm heated zone
  • 1200°C continuous working temperature with 1 to 20°C/min of thermal rate
  • Software based PID control with 4 lines LCD display for precise operation
  • Designed ergonomically with K-type thermocouple and thermal shock resistant tubes
  • Steps heating program with custom preset programs
  • Dual shell housing and durable inside lining of light insulating bricks
  • Gas inlet and evacuation system option for protective atmosphere
  • Accurate measurement and temperature control with high precision
Tube furnace is used for purification, coating, drying, hardening or ageing of samples, for annealing, brazing, calcination, degassing, sintering, soldering, sublimation, synthesis, and tempering, thermocouple calibration, in the testing of fuel cells, or in catalyst research.