DIN abrasion tester TDAT-A10

DIN abrasion tester TDAT-A10


DIN abrasion tester TDAT-A10 determines abrasion resistance of rubber made products, natural rubber, vulcanized rubber, thermoplastic amorphous polymers to withstand the long term damage as a result of friction due to its excessive use. The ratio between standard loss of rubber material & test rubber material, expressed in percentage, marks the abrasion resistance index of sample under test.




Share :


Test arm weight2.5 N
Additional Loads2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
Idler150 mm
Abrasion stroke40 ± 0.2 M
Horizontal displacement4.2 mm/ rotation
Stroke20 m/ 40 m presetting
Grips lateral displacement4.2 ± 0.04 mm/ rotation
Idler wheel speed40 ± 1 rpm
Measurement modeAuto/ manual presetting
Specimen sizeDiameter 16 mm, thickness at least 6 mm
Emery cloth specifications60 # seam is less than 2 mm
Shift screw6 teeth/ inch
Limit rotation85 rotate
Set rotation84 rotation of 40 meters
Return formElectric automatic reset
Net Weight75 kg
Dimension950 × 660 × 310 mm
Power supply220 V, 50 / 60Hz
  • Automatic electric lock for the rotating cylinder
  • Mechanical unlocking of the cylinder for easy abrasive replacement
  • Screw for adjustment of abrasion specimen
  • Enables control uniformity of specific material
  • Machine with metallic base plate, polished paint & zinc coating
  • High quality machine design with reproducible results
  • Easy to operate
DIN abrasion tester is used to determine the abrasion resistance of elastomers by the frictional loss of the rubber in products such as tires, conveyor belts, hoses, footwear, floor covering, thermoplastic amorphous polymers etc.

Related Products